Computational modeling and experimental validation of sulfuric acid decomposition for thermochemical hydrogen production

International Journal of Hydrogen Energy, Volume 112, Issue 1, 243; 2025-03

From Airborne Bacteria to Imaging Chip: A Fully Integrated System for On-Site Bioaerosol Monitoring

Sensors and Actuators B: Chemical, Volume 426, 137084; 2025-03

Polar Coordinate-based Guided wave Beamforming Imaging using a Scanning LDV

Structural Health Monitoring, Volume 24, Issue 2, 963-978; 2025-03

Simple and effective strategies to pick up foods for a meal assistant robot integrated with an integrated spoon and chopstick mechanism

Intelligent Service Robotics, Volume 18, 325-338; 2025-03

Harnessing native blueprints for designing bioinks to bioprint functional cardiac tissue

iScience, Volume 28, Issue 3, 111882; 2025-03

Small Force Estimation and Velocity Limitation Control for a Tele-operated 6-DoF Eye Surgery Robot

IEEE Access, Volume 13, 60327 - 60340; 2025-03

Artificial Neural Network (ANN)–Based Prediction Model of Demolding Force in Injection Molding Process

Advances in Polymer Technology, Volume 2025, 1528204; 2025-03

A novel reinforcement learning controller for the DC-DC boost converter

Energy, Volume 321, Issue 1, 135479; 2025-04

Fibrous sphere architectures for efficient daytime radiative cooling and moisture management

Nano Letters, Volume 25, Issue 14, 5609-5615; 2025-04

Optimal ventilation strategies by artificial intelligence for gaseous materials reduction in livestock building

Computers and Electronics in Agriculture, Volume 231, 110035; 2025-04

Development of Multifunctional PAA-Alginate-Carboxymethyl Cellulose Hydrogel-Loaded Fiber-Reinforced Biomimetic Scaffolds for Controlled Release of Curcumin

International Journal of Biological Macromolecules, Volume 301, 140449; 2025-04

Enhanced Motion Control of Magnetically Actuated Capsule Robot Using MEMA—A Mobile Electromagnetic Actuation System

IEEE/ASME Transactions on Mechatronics, Volume 30, Issue 2, 933-944; 2025-04

Biomimetic Design and Fabrication of Hydroxyapatite Bone Scaffolds with Controllable Interconnected Pores via Modified Direct Foaming Method

Journal of Materials Science, Volume 60, 6671-6687; 2025-04

Improved Mechanical Stability and Regulated Gentamicin-Release of Polyvinyl Alcohol/Chitosan Nanofiber Membranes via Heat Treatment

Journal of Biomedical Materials Research PART A, Volume 113, Issue 4, e37905; 2025-04

Improved performance of fNIRS-BCI by
stacking of deep learning-derived
frequency domain features

PLOS ONE, Volume 20, Issue 4, e0314447; 2025-04

Enhancing Cardiomyocyte Maturation through PEDOT:PSS-Coated Surfaces and Mechanical Stimulation with Strain Sensors

Journal of Micromechanics and Microengineering, Volume 35, Issue 4, 45002; 2025-04

Transfer learning–based energy consumption prediction for variable refrigerant flow system in buildings

Applied Thermal Engineering, Volume 267, 125811; 2025-05

United effect of nonthermal plasma driven O3 water and phenolic compounds for bacterial biofilm quorum sensing reduction under the O3 processed nitro-hydroxylation and norfloxacin remediation via oxidation

Journal of Water Process Engineering, Volume 74, Issue 1, 107756; 2025-05

Aerial Manipulator With a Laterally Extendable Scissor Mechanism for
Both Extension and Automatic Moment Compensation Using a Single Actuator

International Journal of Control, Automation, and Systems, Volume 23(5), Issue 2025, 1510-1519; 2025-05

Droplet acoustofluidics: Recent progress and challenges

Biomicrofluidics, Volume 19, Issue 3; 2025-05

Asymmetric auto-rebalancing of electrolyte for high capacity retention and high energy efficiency of vanadium redox flow batteries

Applied Energy, Volume 388, Issue 1, 125663; 2025-06

Modeling and performance optimization of vanadium redox flow batteries

Journal of Energy Storage, Volume 121, Issue 1, 116601; 2025-06

Development and validation of aggregation method for fault detection and diagnostics in HVAC systems

Energy and Buildings, Volume 336, 115593; 2025-06

Biased dual‑exfoliation technique with expanded graphite for high‑quality few‑layer graphene sheets in electrochemical exfoliation

Carbon Letters, Volume 35, Issue 3, 1205-1220; 2025-06

A PDMS diaphragm-based bioreactor integrating mechanical and electrical stimulation for enhanced cardiomyocyte functionality and maturation

Sensors and Actuators A: Physical, Volume 387, 116468; 2025-06

Robot Path Planning With Grasping Pose Flexibility Incorporating Local Gap Sampling Approach

International Journal of Control, Automation and Systems, Volume 23, 1790-1801; 2025-06

Multilayer gels with spatial arrangement of functional nanomaterials

Advanced Composites and Hybrid Materials, Volume 8, Issue 316, 2025; 2025-07

Comparative insight into negative electrode performance in lead-acid and lead-carbon batteries under high-load and partial state-of-charge cycling profiles

Journal of Energy Storage, Volume 124, Issue 1, 116745; 2025-07

Dual-sensitized hollow SnO2 nanospheres with rGO and Pd for highly sensitive detection of acetone in exhaled breath

Applied Surface Science, Volume 696, 162959; 2025-07

Scandia-stabilized zirconia (ScSZ) cathode functional layer fabricated via DC reactive sputtering for low-temperature solid oxide fuel cells

Ceramics International, Volume 51, Issue 18, 26519-26525; 2025-07

Third-Order Optical Nonlinearities of Pristine and Manganese Substituted Bismuth Subcarbonate Nanostructures for Smart Filtering Optical Radiation

ACS Applied Nano Materials, Volume 8, Issue 26; 2025-07

Learning-Based Kinematic Modeling for Concentric Tube Robot: Addressing its Nonlinearity and Snapping Behavior

IEEE Robotics and Automation Letters, Volume 10, Issue 7, 7070 - 7077; 2025-07

Preliminary Study on the Development of a Biodegradable Functional Nasal Packing Material

Polymers, Volume 17, Issue 13, 1878; 2025-07

A double-loop robust position and speed control of an electromagnetic actuator against nonlinear model uncertainties

Control Engineering Practice, Volume 160, 106318; 2025-07

Experimental Analysis of Sensor’s Performance
Degradation under Adverse Weather Conditions

International Journal of Precision Engineering and Manufacturing, Volume 26, 1655-1672; 2025-07

Optimizing the Au Particle Doping Size for Enhanced Photocatalytic Disinfection under Low-Intensity Visible Light

ACS Nano, Volume 19, Issue 30; 2025-08

Supersaturated glycerogels for sustainable on-demand energy harvesting over a wide temperature range

Chemical Engineering Journal, Volume 518, 164456; 2025-08

Boosting Triboelectric Performance with in situ Prussian Blue-Decorated MXene Nanocomposites in P(VDF-TrFE) and Nylon-11 Nanofibers for Self-Powered Photodetectors

Small, Volume 21, Issue 32, 2504367; 2025-08

3D-Printed CNT-Reinforced Bioresorbable Vascular Scaffold with Enhanced Mechanical Stability and Integrated Wireless Pressure Sensor for Continuous Hemodynamic Monitoring

ACS Sensors, Volume 10, Issue 8, 5724-5735; 2025-08

Highly efficient dye adsorption and sunlight-driven photocatalytic degradation using electrospun PAN/CDs@BN fibrous membranes

Separation and Purification Technology, Volume 364, Issue 2, 132479; 2025-08

Accurate Phase-based 3D Positioning for Machine Calibration using Perspective-Aligned Gabor Filter and Monocular Vision

Mechanical Systems and Signal Processing, Volume 237, 113074; 2025-08

Enhanced Crack Detection in Large Stamped Metal Products via Deep Learning and Edge Line Analysis

The International Journal of Advanced Manufacturing Technology, Volume 139, 5473-5490; 2025-08

Three-dimensional Needle Shape Reconstruction Using Robotic Ultrasound Tracking System With U-Net-based Segmentation Mode

International Journal of Control, Automation, and Systems, Volume 23, 2420-2432; 2025-08

PANI nanowire-decorated elestrospun composite nanofibers for advanced tirboeletric Nanogenerators and rectifier-free self-charging supercapacitors

Chemical Engineering Journal, Volume 519, 165418; 2025-09

Electrospun bilayer PVDF-HFP-TiO2/Al2O3 nanofiber membranes for high-performance passive radiative cooling

Journal of Materials Chemistry A, Volume 36; 2025-09

Multi-dimensional modeling of sulfuric acid decomposer for thermochemical hydrogen production

Applied Thermal Engineering, Volume 274, Issue 1, 126599; 2025-09

Development and Experimental Validation of Force-Sensing Biopsy Needle for MRI-Guided Prostate Biopsy

Photonic Sensors, Volume 15, 250427; 2025-09

Prediction of welding distortion in 316L stainless steel using FCAW: part 1

International Journal of Advanced Manufacturing Technology, Volume 140, 623-636; 2025-09

Novel energy management strategy for fuel cell/battery hybrid energy systems combining MPC and deep reinforcement learning Energy Conversion and Management

Energy Conversion and Management, Volume 341, Issue 1, 120081; 2025-10

Recent Advances in Functional Energy Materials for Microbial Fuel Cells: Progress, Challenges, and Future Perspectives

Journal of Materials Chemistry A, Volume 38; 2025-10

Phase-based crossline center detection for robust vibration monitoring under large motion and pose variations

Mechanical Systems and Signal Processing, Volume 239, 113287; 2025-10

Parameter identification with hybrid reinforcement learning algorithm of proton exchange membrane electrolyzer

International Journal of Hydrogen Energy, Volume 174, Issue 1, 151187; 2025-10

Fault detection and diagnosis and fault-tolerant control for air-handling unit via agent-based hardware-in-the-loop simulation

Journal of Building Engineering, Volume 111, 113251; 2025-10

Optimization and operation of integrated air-water heat pump systems with energy storage and renewable energy based on deep learning

Journal of Building Engineering, Volume 111, 113344; 2025-10

Dimensionless analysis and novel configuration for enhanced natural convection cooling in lithium-ion batteries

Case Studies in Thermal Engineering, Volume 74, 106766; 2025-10

Electrical grid-independent machine learning-assisted wearable gait analysis device with triboelectric-electromagnetic hybrid energy harvester

BIOSENSORS & BIOELECTRONICS, Volume 288, 117766; 2025-11

Hierarchical rolling optimization strategy for hybrid electric-hydrogen system based on deep reinforcement learning

Energy, Volume 338, Issue 1, 138952; 2025-11

Virtual Sensor Grids for Full-field Vibration Measurement via Super pixel Segmentation and Phase-based Optical Flow

Mechanical Systems and Signal Processing, Volume 240, 113414; 2025-11

Design and Validation of an X-ray Compatible Remotely Actuated Rotational End-effector for Cable-Driven Parallel Robot

Mechanism and Machine Theory, Volume 215, 106164; 2025-11

Single-Layered Seamless Triboelectric Touch Position Sensor with Sedimentation-driven Transformation of Sol-State Nanocomposite Precursor into Bifunctional Composite

SusMat, Volume 5, Issue 6, e70052; 2025-12

Fully Self-Powered Memristor Crossbar Array with Pressure-Driven Multilevel Switching and Pattern Encoding

Nano Energy, Volume 146, 111497; 2025-12

Molecular Insights into Co-Solvent and Water Duality in Amine-Based CO₂ Absorption via Neural Network-Based Atomistic Simulations

Chemical Engineering Journal, Volume 525, 169980; 2025-12

Surface - Engineered Porous MXene-Elastomer Composites-based Ultra-Sensitive Pressure Sensor Assembled via Electrostatic Interaction for Human-Machine Interface

Microsystems & Nanoengineering, Volume 11, 249; 2025-12

Fe-aminoclay functionalized activated carbon for adsorptive removal of phosphate and methyl orange from aqueous solutions

Separation and Purification Technology, Volume 379, Issue 2, 134946; 2025-12

Novel design and performance analysis of a spiral sulfuric acid decomposer for thermochemical hydrogen production

International Journal of Hydrogen Energy, Volume 196, Issue 1, 152551; 2025-12

Acoustofluidic separation of cell-encapsulated droplets with co-encapsulated carrier microparticles

Sensors and Actuators B: Chemical, Volume 444, Issue 1, 138529; 2025-12

Hydrogel-Integrated Biomimetic Hydroxyapatite Scaffolds with Tunable Porosity for Enhanced Curcumin Delivery

Journal of Drug Delivery Science and Technology, Volume 114, Issue B, 107572; 2025-12

High-k water intermediate layer-mediated charge transfer modulation toward stable and augmented output generation of droplet-based electricity generators

Scientific Reports, Volume 15, Issue 1, 45695; 2025-12

Scan matching validation scheme based on the neural network using Gaussian model input to improve robustness of graph SLAM. International Journal of Advanced Robotic Systems

International Journal of Advanced Robotic Systems, Volume 22, Issue 6, 1; 2025-12

A Comprehensive Review of Electrochemical Exfoliation of Graphite for Tunable Graphene Architecture: Mechanistic Insights, Design Principles, Functional Derivatives, and Emerging Applications

Carbon, Volume 246, 120888; 2026-01

Dual-functional photothermal-responsive PVDF-HFP/CDs@BN fibrous membranes for highly efficient water-in-oil emulsion separation and high-viscosity oil removal

Journal of Membrane Science, Volume 738, Issue A, 124802; 2026-01

Bio-derived carbon dot-loaded PVA/CNC films with antioxidant, UV-blocking, and antimicrobial properties for active food packaging

International Journal of Biological Macromolecules, Volume 337, Issue 1, 149455; 2026-01

Versatile topology optimization framework using embedded self-improving neural network

Engineering Applications of Artificial Intelligence, Volume 163, Issue 3, 113007; 2026-01

InGaN-GaN-MQW-ZnO based e-nose sensors for nitrogen dioxide detection using advanced machine learning approaches

Sensors and Actuators B: Chemical, Volume 446, 138650; 2026-01

Estimation of demand flexibility in small- and medium-size commercial buildings served by rooftop units

Applied Thermal Engineering, Volume 284, Issue 2, 129164; 2026-01

Co-Fe-Ce for photocatalytic micropollutants removal and electro-catalytic hydrogen production via ion exchange membrane water electrolyzer

Journal of Water Process Engineering, Volume 81, Issue 1, 109334; 2026-01

Robotic Interventional Needle Insertion Assisted by a Cable-Driven Parallel Robot

Advanced Intelligent Systems, Volume 8, Issue 1, 2500188; 2026-01

Development and Pilot Evaluation of a Binocular Virtual Reality Headset-Based Pupillometer for Quantitative Assessment of Pupillary Light Reflexes

Scientific Reports, Volume 16, 1352; 2026-01

Recent progress in flux-mediated synthesis of complex oxide thin films and their emerging applications

Journal of the Korean Ceramic Society, Volume 63, 203-214; 2026-01

Deep Learning-based automated detection of steel coil loosening in sheet metal manufacturing

International Journal of Advanced Manufacturing Technology, Volume 142, 789-800; 2026-01

Hydrogel Thin-Film Magnetic Millirobots with Programmable Deformation and Shape Retention for Biomedical Applications

Advanced functional materials, Volume 36, Issue 13, e10751; 2026-02

Overcoming the sensitivity–stability trade-off in colorimetric food sensors using immersion-electrospun natural anthocyanin-loaded PCL/PVP membrane

Food Chemistry, Volume 501, 147547; 2026-02

Retention of Vertically Aligned Carbon Nanotubes Enables Efficient Thermal Pathways in PDMS-Based Composites2

Composites Part A: Applied Science and Manufacturing, Volume 201, 109395; 2026-02

Triboelectric enhancement in droplet-based electricity generators via Nafion-functionalized cellulose nanocrystals

ACS Applied Materials & Interfaces, Volume 18, Issue 6; 2026-02

A 3D-printed pre-filter with a crystal violet–gold nanocluster hybrid for a reusable visible-light-activated antimicrobial air filtration system

Inorganic Chemistry Frontiers, Volume 3; 2026-02

Structural Stability, Saturable and Reverse Saturable Absorption of Femtosecond Laser Patterned MoS2

ACS Applied Nano Materials, Volume 9, Issue 5; 2026-02

Ni-Fe-Pd catalyst for antibiotics removal through the photo-catalytic effect and water electrolyzer for hydrogen production via electro catalytic energy application

Journal of Molecular Structure, Volume 1353, Issue 1, 144642; 2026-02

Effective combination of light irradiation on pyrolyzed renewable carbon for remediation of harmful organic pollutants and bacterial prevention via photocatalytic oxidative process along with energy evaluations

Journal of Molecular Structure, Volume 1352, Issue 1, 144406; 2026-02

Crack Detection in the Multi-Stage Stamping Process Using Acoustic Emission Based on Baseline Feature Distributions

International Journal of Advanced Manufacturing Technology, Volume 142, 3735-3749; 2026-02

Parameter Optimization for High-Resolution Microfluidic Channel Fabrication Using a Commercial Low-Cost MSLA Printer

micromachines, Volume 17, Issue 2, 236; 2026-02