4단계 BK21사업 1차년도 SCIE 논문 실적

4단계 BK21사업 1차년도 SCIE 논문 실적
- 1차년도 사업기간: 2020.9.1.~2021.2.28.
----------------------------------------------------------------
1. “Biodiesel fueled combustion performance and emission characteristics under various intake air temperature and injection timing conditions”, Energy, Vol. 206, pp. 118154 (2020)

 

2. “Investigation of the Emission Characteristics of Light-Duty Diesel Vehicles in Korea Based on EURO-VI Standards According to Type of After-Treatment System”, Energies, Vol. 13(18), pp. 4936 (2020)

 

3. “Observer-Based Deconvolution of Deterministic Input in Coprime Multichannel Systems With Its Application to Noninvasive Central Blood Pressure Monitoring”, Journal of Dynamic Systems Measurement and Control-Transactions of the ASME, Vol. 142(9), pp. 091006 (2020)

 

4. “Surfactant-added hydrophilic polydimethylsiloxane (PDMS) as mold material for thermoplastic hot embossing process”, AIP Advances, Vol. 10(9), pp. 095130 (2020)

 

5. “An image processing-based crack detection technique for pressed panel products”, Journal of Manufacturing Systems, Vol. 57, pp. 287-297 (2020)

 

6. “Application of semi-permeable membrane for a scaffold in a nature-mimicking vascular system”, Journal of Membrane Science, Vol. 611, pp. 118384 (2020)

 

7. “Conventional pulse transit times as markers of blood pressure changes in humans”, Scientific Reports, Vol. 10, pp. 16373 (2020)

 

8. “Effects of SiO2/Al2O3 ratio, reaction atmosphere and metal additive on de-NOx performance of HC-SCR over Cu-based ZSM-5”, Journal of Industrial and Engineering Chemistry, Vol. 90, pp. 132-144 (2020)

 

9. “High-Frequency and High-Powered Electromagnetic Actuation System Utilizing Two-Stage Resonant Effects”, IEEE-ASME Transactions on Mechatronics, Vol. 25(5), pp. 2398-2408 (2020)

 

10. “Highly Flexible Superhydrophobic Poly(Urethane Acrylate) Film for Applications Requiring High Optical Transparency”, Macromolecular Materials and Engineering, Vol. 305(10), pp. 2000292 (2020)

 

11. “Mechanoadaptive organization of stress fber subtypes in epithelial cells under cyclic stretches and stretch release”, Scientific Reports, Vol. 10, pp. 18684 (2020)

 

12. “Robotic Localization Based on Planar Cable Robot and Hall Sensor Array Applied to Magnetic Capsule Endoscope”, Sensors, Vol. 20(20), pp. 5728 (2020)

 

13. “Spray characteristics of direct injection injectors with different nozzle configurations under flash-boiling conditions”, International Journal of Heat and Mass Transfer, Vol. 159, pp. 120104 (2020)

 

14. “Temperature and hydrogen flow rate controls of diesel autothermal reformer for 3.6 kW PEM fuel cell system with autoignition delay time analysis”, International Journal of Hydrogen Energy, Vol. 45(53), pp. 29345-29355 (2020)

 

15. “Vertically aligned one-dimensional ZnO/V2O5 core–shell hetero-nanostructure for photoelectrochemical water splitting”, Journal of Energy Chemistry, Vol. 49, pp. 262-274 (2020)

 

16. “Wireless Walking Paper Robot Driven by Magnetic Polymer Actuator”, Actuators, Vol. 9(4), pp. 109 (2020)

 

17. “A Stiffness Adjustable 6-DOF Robotic System for Pituitary Tumor Resection Under MRI”, IEEE Access, Vol. 8, pp. 192557-192568 (2020)

 

18. “Acoustofluidic generation of droplets with tunable chemical concentrations”, Lab on a Chip, Vol. 20(21), pp. 3922-3929 (2020)

 

19. “Elastomeric high-κ composites of low dielectric loss tangent: Experiment and simulation”, Composites Part B-Engineering, Vol. 201, pp. 108337 (2020)

 

20. “Electricity load forecasting using advanced feature selection and optimal deep learning model for the variable refrigerant flow systems”, Energy Reports, Vol. 6, pp. 2604-2618 (2020)

 

21. “Experimental study of a thin water-film evaporative cooling system to enhance the energy conversion efficiency of a thermoelectric device”, Energy, Vol. 211, pp. 119040 (2020)

 

22. “Galinstan-based flexible microfluidic device for wireless human-sensor applications”, Sensors and Actuators A-Physical, Vol. 315, pp. 112344 (2020)

 

23. “High-performance biocompatible nanobiocomposite artificial muscles based on ammonia-functionalized graphene nanoplatelets–cellulose acetate combined with PVDF”, Sensors and Actuators B-Chemical, Vol. 323, pp. 128709 (2020)

 

24. “Large scale roll-to-roll production of polyurethane-acrylate-based hydrophobic film: a next-generation protection layer for solar devices”, Journal of Micromechanics and Microengineering, Vol. 30(11), pp. 115007 (2020)

 

25. “Localization and Actuation for MNPs Based on Magnetic Field-Free Point: Feasibility of Movable Electromagnetic Actuations”, Micromachines, Vol. 11(11), pp. 1020 (2020)

 

26. “Sequence-to-sequence neural networks for short-term electrical load forecasting in commercial office buildings”, Energy and Buildings, Vol. 226, pp. 110350 (2020)

 

27. “Transition metal sulfide-laminated copper wire for flexible hybrid supercapacitor”, New Journal of Chemistry, Vol. 44(42), pp. 18489-18495 (2020)

 

28. “2D-wavelet wavenumber filtering for structural damage detection using full steady-state wavefield laser scanning”, NDT & E International, Vol. 116, pp. 102343 (2020)

29. “A microfluidic circuit consisting of individualized components with a 3D slope valve for automation of sequential liquid control”, Lab on a Chip, Vol. 20(23), pp. 4433-4441 (2020)

 

30. “Alleviating the performance degradation of fuel cells caused by the uneven distribution of internal physical fields, Energy Conversion and Management, Vol. 225, pp. 113449 (2020)

 

31. “Development, implementation, and evaluation of a fault detection and diagnostics system based on integrated virtual sensors and fault impact models”, Energy and Buildings, Vol. 228, pp. 110368 (2020)

 

32. “Novel force sensing module for a concentric tube-based vitreoretinal surgical robot”, Sensors and Actuators A-Physical, Vol. 316, pp. 112395 (2020)

 

33. “REVIEW OF RECENT AFTER-TREATMENT TECHNOLOGIES FOR DE-NOx PROCESS IN DIESEL ENGINES”, International Journal of Automotive Technology, Vol. 21(6), pp. 1597-1618 (2020)

 

34. “Self-folded microrobot for active drug delivery and rapid ultrasound-triggered drug release”, Sensors and Actuators B-Chemical, Vol. 324, pp. 128752 (2020)

 

35. “De-NOx characteristics of HC-SCR system employing combined Ag/Al2O3 and CuSn/ZSM-5 catalyst”, Journal of Industrial and Engineering Chemistry, Vol. 93, pp. 461-475 (2021)

 

36. “Development of an Optimal Start Control Strategy for a Variable Refrigerant Flow (VRF) System”, Energies, Vol. 14(2), pp. 271 (2021)

 

37. “Flexible, polymer-supported, ZnO nanorod array photoelectrodes for PEC water splitting applications", Materials Science in Semiconductor Processing, Vol. 121, pp. 105445 (2021)

 

38. “Multifunctional Biodegradable Microrobot with Programmable Morphology for Biomedical Applications", ACS Nano, Vol. 15(1), pp. 1059-1076 (2021)

 

39. “On-stage bioreactor platform integrated with nano-patterned and gold-coated PDMS diaphragm for live cell stimulation and imaging", Materials Science & Engineering C-Materials for Biological Applications, Vol. 118, pp. 111355 (2021)

 

40. “Surface functionalization of acidified graphene through amidation for enhanced oxygen reduction reaction", Applied Surface Science, Vol. 536, pp. 147760 (2021)

 

41. “Theoretical and experimental study on liquid film thicknesses of unsteady slug flows in a capillary tube", International Journal of Multiphase Flow, Vol. 134, pp. 103470 (2021)

 

42. “Unveiling the neuromechanical mechanisms underlying the synergistic interactions in human sensorimotor system", Scientific Reports, Vol. 11, pp. 203 (2021)

 

43. “Ball Motion and Near-Field Spray Characteristics of a Gasoline Direct Injection Injector using an X-ray Phase-Contrast Imaging Technique under High-Injection Pressures", International Journal of Heat and Mass Transfer, Vol. 166, pp. 120725 (2021)

 

44. “Compensated active disturbance rejection control for voltageregulation of a DC–DC boost converter", IET Power Electronics, Vol. 14(2), pp. 432-441 (2021)

 

45. “Effect of sac-volume on the relationship among ball behavior, injection and initial spray characteristics of ultra-high pressure GDI injector", Fuel, Vol. 285, pp. 119089 (2021)

 

46. “Micromotor Manipulation Using Ultrasonic Active Traveling Waves", Micromachines, Vol. 12(2), pp. 192 (2021)

 

47. “STUDY ON CAVITATING FLOW INSIDE ORIFICE AND SPRAY ANGLE NEAR NOZZLE TIP ACCORDING TO THE POSITION OF NEEDLE USING ENLARGED TRANSPARENT ACRYLIC NOZZLE", International Journal of Automotive Technology, Vol. 22(1), pp. 11-18 (2021)